Looking for some more hot deals on Olympic 4×4 Jeep parts and accessories? Well I have a few here I think you might like to check out!
Jacklite Brackets for Jeep Wrangler JK by Olympic 4×4
Olympics Jacklite Brackets easily bolt onto any custom Wrangler JK Front Bumpers, which utilize the eight existing mounting holes in the front of the vehicles frame works. You have a choice of laying your Jack on either of its two sides and fastening it to a variety of predrilled holes in the Jacklite Brackets. You can install one pair of lights with the Jack, or two pair of lights without the jack.
Sold in pair, made from 1/4” thick x 2” wide solid steel plate.
Power coated in Rubicon (textured) Black, also available in raw steel for welding applications To install; simply remove the hardware that hold almost all aftermarket front bumpers to the frame of the JK, place the Jacklite Brackets in place in front of the bumper and refasten the original hardware.
Mountaineer Rack for Jeep Wrangler JK by Olympic 4×4
Interior Basket size is 4” X 22 1⁄4” X 44 1⁄2”
Divides and doubles the storage space behind the rear seat. When camping and four wheeling, install heavy items (ice chest and tools) below the rack and sleeping bags and clothes on top of rack.
Wrangler and Unlimited 1997-newer installs without drilling, as the mounting brackets bolt to the roll bar above tonneau cover.
Earlier model Wranglers YJ 1987-1995, CJs 1955-1986 require four 5/16” holes to be drilled into the rear wheel well. Cherokee XJ requires drilling four 1⁄2” holes into floor board. On some model Wranglers it is required to trim the roll bar padding. Your choice of three powder coated finishes.
Olympic 4×4 Rear Smuggler Winch Bumper with Tire Carrier For 07-09 Jeep Wrangler & Wrangler Unlimited JK
- Built in Rear Winch Mount Plate.
- Unique Tire swings folds down or and swings out.
- Hi Lift Jack positioning mounting inserts.
- D Ring Mounts
- 2” Receiver Hitch
Smuggler Rear Bumper features a unique Rear Tire Carrier that can swing both Horizontal and Vertical. The tire carriers extremely unique vertical ability enables the Tire Carrier to unfold in a down position placing the tire on the ground, so you can roll your tire off the tire mount instead of lifting it off. This feature is especially helpful as many tires weigh close to a hundred pounds.
Olympic has engineered an insert point for a Hi Lift Jack, which is lined up with the frame of the vehicle so you are lifting the vehicle up by the frame and not the bumper.
There are two D Ring Mounts securely welded into place and a 2” Receiver Hitch with a safety chain on the underside of the Winch plate, strengthening the winch mount and fortifying the structure of the bumper, protecting it from off road hazards.
Optional: Lockable cover sold separately to hide your tools and other valuables.